A render NOT done en passant!

Well, t’ other day… and by “t’ other day” I mean “more than a month ago”, DAZ was running one of its insanely convoluted sales, as per usual. 😛 They’re normally something like “buy an item in Group A and get anything from Group B for X% off, but buy two or more items from Group A and get all the things you chose in Group B for Y% off and get Z% off gift cards! (excluding new releases)”. Yes really. Also, several types of sale tend to be running at once, making it even MORE complicated. 😛 Even though they have so many of these sales, they’re never good, they sometimes lie, and I tend to have literally no interest in any of the items they have on offer.

Aha, but the one that caught my eye was interesting. Sure, the offer was totally idiotic: “buy one of these 6 new (they definitely weren’t new because I’d seen them before, heh) special effects items for 40% off and get 80% off everything in these two groups of assets, and 50% off this other group of assets.” Sounded like another overcomplicated yawnfest, but one of the groups of assets for 80% off was themed very nicely. It was all about, yes, of course: dragons! Specifically, the Dragon 3! 😀

Y’see, I didn’t own Dragon 3 legitimately, even though it’s an awesome figure. That’s because, for me, the asking price was way too high, especially for the amount I actually use DAZ Studio. Besides, I never really liked the thought of buying assets for DS. Kinda difficult to explain why… maybe it’s my lack of appreciation for art. 😛 I mean, all you can do with DS assets is pose them and render something out that someone may or may not look at for a maximum of 60 seconds. The renders can be pretty, but it’s not as if they demonstrate real skill. 😛 Sure, designing the scene takes some imagination, and the posing, lighting and camera setup takes a good amount of effort, but you’d never get the same level of respect as someone who actually made the models, or painted the same scene in Photoshop from scratch. Real artists would probably laugh at the stuff that I do, and not in the way I intended. 😛 I think of it in this way: DAZ Studio is like Multimedia Fusion. MMF can help you create games and applications with almost no technical skill, whereas DS can help you create nice artwork with almost no artistic skill… apart from that gamers generally don’t judge a game on the engine it’s built with, whereas artists would judge art based on how you create it… but then again, normal viewers of said art probably wouldn’t… maybe. 😛

Okay, now I don’t even know what I’m talking about. 😛 Skipping over my dumbass logic, another reason why I never really buy assets is because DAZ Studio is not a particularly stable piece of software, yes, even after finding out my BSODs weren’t actually caused by it. And just like I won’t buy broken vidya gamez, I just can’t bring myself to buy figures for a piece of rendering software which doesn’t work properly. 😛 Because of the immensity of this sale, though, and because the Dragon 3 is epic, I thought I’d put things right, and decided to get a legit version of the Dragon 3 Pro Bundle along with a lot of additional mods and an effects pack called DragonFire. Many of the things I got weren’t available anywhere else, anyway. Man, it was like the storefront was made for me, because they even had a different sale on at the same time which featured a crapton of other monster-related items, including armour and attachments for the Dragon 3, a supermorph that turns Dragon 3 into a Wyvern, the awesome-looking Reptilian 6 supermorph for Genesis 2, and a gargoyle mod that required Reptilian 6. Unfortunately, that mod required another mod which was illogically expensive, and this is where I had to stop myself. 😛 Lizardmen and gargoyles are awesome, but I can’t really think of a scene where I can use them… well, not off the top of my head, anyway.

After checking out my haul, I found out you could install these items directly within the fairly new DAZ Studio 4.9 instead of using the DAZ Install Manager or doing it manually. Intrigued by this and whether 4.9 was any more stable than 4.8 when rendering, I decided to open up the DAZ Install Manager (DIM) to install it. Unfortunately, DIM is… dim. 😛 Installing a new version of DS removes old versions automatically, without permission. That, and you can’t install old versions. They don’t show up in DIM and I can’t find DS 4.8 on my account. So… now I’m forced to use DAZ Studio 4.9. Thanks! Thanks a lot. >.<

Doesn’t matter, really. DS 4.9 is pretty much identical to DS 4.8. 😛

Well, okay. There’s a new splash screen. 😛 There’s also “DAZ Connect” and “Smart Content”, which lets you connect to your account, download products and install them from within DS, which is slightly easier than using DIM. Uh… the installation process is slightly easier, that is. Everything afterwards is way harder. 😛 Y’see, Smart Content uses its own content library, so anything you download with it doesn’t go with your other content. That, and it doesn’t… actually contain all the content on your account. I mean, the Dragon 3 Pro Bundle comes with additional textures, and I’ve scrolled through my list about five times now… and they’re just… not here. 😛 So, Smart Content is… not smart. It’s stupid and pointless. Using DIM is better because that does show all your owned content, but after installing content from DIM, if you rearrange your content directories to make them neater because you have mild OCD like me, the metadata breaks. So, doing it manually is the best way, as per bloody usual! 😛

What else is new… er… hmmm… well. It’s er… yeah, there… isn’t anything else I can see. I mean, I thought they’d have fixed that one bug where moving or rotating the camera sometimes makes it teleport 8 billion miles from where you were or rotate 3000 degrees instantly, or that other bug where attempting to adjust a property increases or decreases it by several thousand units instantly, and that other bug where clicking on something in the Scene hierarchy makes it select everything from what you had selected down to what you just clicked on for no reason. I also thought they’d make their interface to the NVIDIA Iray renderer more understandable and less impossible to configure so that I’d actually want to use it, but y’know, they must’ve been really busy with all those other invisible features that they forgot to fix these infuriating issues. 😛 It’s no more performant, renders look the same and take the same amount of time, and it’s just as UNstable as 4.8. Brilliant. GG DAZ.

Anyway, phuck that, let’s get to the point. 😛 In the sale, I snagged a couple of new supermorphs for the Dragon 3, the Hellborn Dragon and Spectral Dragon. I noticed they almost look like polar opposites, and because of this, I thought I’d make a little render with both of them together. A render depicting a conflict between the forces of heaven and hell, good and evil, black and white. A render showing the Spectral and Hellborn dragons locked in fierce combat on a famous battleground. A battle where they must protect their weak points, think before every move they make… a battle that will strain their minds to the limit, where only one dragon will walk away victorious… unless they both agree to cease the fighting, or if STALEMATE OCCURS.

Or if THREEFOLD REPETITION OCCURS!

OR THE 50 MOVE RULE!

You got it?!

YES, it’s TWO DRAGONS FUCKING PLAYING CHESS!! CHECK it out, MATE:

Dueling Dragons (1080p)
Available in: (1080p) (QHD) (UHD)

The Light Dragon slid his Queen across the board, claiming yet another black pawn. A low, quiet growl of frustration rumbled from the Hell Dragon’s throat as his opponent placed the black piece among his ever-growing collection. The Hell Dragon’s skin glowed as he scratched the back of his neck, pondering his next move, trying not to take notice of the white dragon’s calm, complacent gaze, or the gentle sound of his talons clicking against the marble floor.
“Rrr… if we were playing Monopoly, you wouldn’t be so smug.” He snarled.

“check it out mate”, oh god that pun made me feel a bit sick

I… just… yes. I believe this scene is all very yes. 😀  But it took FOREVER!

The environment I used came with a preset lightrig which was… well. It was heh. The default settings were retardedly bright, and all the lights were Uber Area Lights which I hate, because although the lights show up as lights in the scene, changing the light settings of the lights don’t change the light settings, because the light settings are actually part of the material. How wonderfully user-friendly and not-at-all impossible to comprehend! 😛

After dimming the lights down a bit, it looked great. The main problem was what happened when you try to render a scene containing UberEnvironment, a ton of Uber Area Lights, a chess set with refraction and reflection and two dragon figures both using Subsurface Scattering. Heheheh… draft renders took about an hour, and that was with the render quality at a crazy-low level! Because the draft renders were so lengthy, I couldn’t easily preview changes I made to the scene, and there’s only so much you can determine by looking at the viewport. There were those problems with BSODs while I was creating this scene too, hence why I totally flipped out and made a massive effort to figure out why the frig the PC was crashing all the time. If I hadn’t fixed it, this scene would have never been finished.

Anyhoo, render stats! At 4K with Depth of Field enabled, UberEnvironment 2 on the XHi preset, 17 Uber Area Lights, a shading rate of 0.25 and 32 pixel samples, the render time was 5 HOURS 32 minutes 6.73 seconds; the longest render I’ve ever done by far. Thanks to the stupid render times and the nice bluescreens I had at first, it’s also been the longest amount of time I’ve ever worked on a scene. 😛

What else… ah, yes, a li’l trivia. 😀 To get the layout of that board, yes, I played chess with myself, purposefully playing Black like a bit of a spanner. 😛 I was originally gonna place the pieces somewhat randomly, but that would’ve probably made the board look weird. I thought about copying a board layout (since there’re a crazy number of diagrams of chess games in the different chess-related sections of Wikipedia 😛 ), but that would’ve been boring and uninspired. I like to add some authenticity. 😀

Also, as you might’ve noticed in the image, I decided to change my artist pseudonym. 😛 There’re two reasons for this, the main one being that my old name, “DracoAurarius”, didn’t really mean anything. Well, sure, it means “Golden Dragon”, but I only chose that name because, I quote: “dragons are the most kickass creatures ever, gold is shiny and the most kickass material ever, gold dragons are crazy-kickass, and when written down at the bottom of artwork, it looks better than say, “MongMaster”. Or “Carl”.” 😛 Now, though, I really want my pseudonym to reflect my wild, out-of-the-box style, and explain that I love making crazy shit with dragons. Hence the change to DracoIndomita, meaning “Wild Dragon” or “Untamed Dragon”. 😀

The second reason for the change is actually a really dumb one. 😛 A long time ago, I had a DeviantArt account under the name of DracoAurarius. I used it to post the first chapter of Dragon Tail; a novel I started writing years ago. I posted the whole first version on this blog, actually, chapter by chapter, but I later removed it for the same reasons I wanted to remove it from DeviantArt. It was an awful, awful piece of writing that was in dire need of a revision, but at the same time I was so proud and so attached to it that there was no way I wanted it to be stolen. 😛 Instead of just deleting the submission from DeviantArt, though, I trashed the entire account. I didn’t really have any use for it, I mean, it didn’t really get any views. Besides, writing isn’t even art! 😛 Back then I had no idea I’d get into DAZ Studio and become good at using it, though.

When I finished Dragon.Init(), I was really happy with it, and since recently I’m only getting 3 views per day here across all 624 posts, I thought I thought I’d make an account on Deviant Art again with the intention of sharing my better stuff so that more people might enjoy it. Doubt anyone would look cuz almost no-one ever looks at my stuff regardless of where I post it, whine whine whine, but hey, I might as well try, right? I tried to create an account with the same name as before, DracoAurarius, but it said the name was claimed. I figured that was impossible because it’s so obscure, so I tried logging in, aaaand it let me in. I was kinda confused since I was sure I’d deleted the account, but it turns out that when you delete an account, DeviantArt doesn’t actually delete it, it just disables it with no way of reactivating it. DURRRR, why the fuck?! Because of that, I couldn’t use DracoAurarius, and that’s what caused me to think about a new name. 😛 With this image, I finally decided to change to DracoIndomita. Took me friggin’ ages to settle on it. 😛

Anyway, sorry for blabbering on about that crap! Here, have a bonus render of the Spectral Dragon:

Serene Spectral Dragon

Hahaha, I love that pose so much. It’s probably the best pose I’ve created; it came out better than I visualised. 😀 He just looks so friggin’ relaxed and smug. Don’t worry, I haven’t left the Hellborn Dragon out; here’s a bonus render of him too:

Serene Spectral Dragon

The subsurface on this one is amazing. 😀 Takes about 20 minutes to calculate then another 40 minutes to render, but still… 😛

Anyhoo, I hope you liek da epic chess match! Time for beddy byes for me. 😛

 

(UPDATEs are below; the main post content was last modified after UPDATE 6. 🙂 )

UPDATE!!
Hrrrgrhhhhaagahhhh! After fixing the DoF issue, I’ve now noticed something else I’m not happy with! I don’t know why, but I’ve lost some of the reflectivity of the chess board. It’s supposed to be a wooden chess board with some glass over it, and it used to be nicely reflective, but the effect’s just disappeared into POOP! That, and the black pieces are way too black with almost no specular highlights, even though I’ve done about 10 test renders and was really happy with the state of the chess pieces! Where’s it all gone?! 😦

Christ, THIS SCENE IS NEVER GONNA EENNNNDD!! It takes about ten hours to render final versions of all the resolutions I want, and I keep seeing minor details that I’m not happy with! It’s all very very annoying. 😛 Yes, of course, I could just render in 4K and downscale to 2K and 1080p, but then you get crappy blurry reduction artefacts, and that SUCKS! I’m not doing it in a half-arsed way. 😛

Welp, here we go with some more tweaking! WHOOOOO

 

UPDATE 2!!
Phuuuuuck… well, it turns out there was already reflection on the chess board. About 80%, actually, which is too high, yet I could see no reflection. That could only mean one thing: DAZ Studio’s default shader was being SHIIIIIIIT!

I switched it to an UberSurface shader and dropped the reflection strength and boosh, it looked pretty much like I remember it being… a bit better actually, since I tweaked the colour of the black pieces and black squares. But then there was ANOTHER problem. Inexplicably, this increased the render time EVEN FURTHER. A 4K render took friggin’ 5 hours 27 minutes, almost an HOUR more than it used to! And then, I noticed the reflection was still too strong! Gnyyyyyyaaaah!

After dropping the reflection strength, I did some calculations and estimated that the three renders would take about 12 hours, which was way too long, so I decided to do the 4K render and the 1080p render for today and do the 2K render overnight. The Pwnage-O-Matic is still blazing away on the 4K render (about 81% done, whoooo!), and by tonight I should have that and the 1080p render, so I’ll post ’em both then. 🙂

 

UPDATE 3!!
FUCK MY LIFE

I got home to what I believed was going to be the final render. And then noticed that the underside of the Spectral Dragon’s wings were not gold. And that’s because I didn’t re-enable the object after doing my render tests for the chess set, because DAZ Studio is a piece of shit and makes it so child objects don’t inherit visibility from their parents, the exact opposite of what Unity does, which I use every day at work. HEADDESK HEADDESK HEADKEYBOARD ARGHHHH

So, that’s ANOTHER 12 hours of rendering to do, but there is NO WAY it can go wrong this time because everything else is fine except for the wings. Graah, why is everything going so shittily recently?!

 

UPDATE 4!!
Finally. FINALLY! YYYYESH! YYYYESH!

I’ve rendered out the 1080p version of it and I’m pretty much as happy as a clam that isn’t in a restaurant. 😀 I’ve updated the post with the new image; I’ll add the higher resolution versions soon. 🙂

 

UPDATE 5!!
4K version is FINITO, and the 2K version is 84% COMPLETEZ0RD. Should be done in about 15-20 minutes, and in that time I am going to eat a burger, wait for the gas man to complete the inspection of the boiler and not submit the update to this post… 20 minutes later, good burger but worst gas man ever who attempted to arrive 30 minutes earlier than I scheduled, then was unbelievably unfriendly while doing the job.

But it’s okay because the 2K version is FINIIIIIIIIIIISH! I’ve added both that and the 4K version to the post, and that is all. OH WAIT, there’s the bonus render of the Hellborn Dragon. I’ll get that started now. 😀

 

UPDATE 6!!
There; added the bonus render of the Hellborn Dragon to the post, and now it’s time to give the PC a break from rendering. Good job, Pwnage-O-Matic. 😀

But hey, if you want this render in a different resolution, I’d be happy to kick off another render for ya! Unless it’s something dumb like QQUHD, which is… 15360×8640. Actually, DAZ Studio can’t render at that resolution, so nyaaaa. 😛 (The highest it could do is 8K. 😉 )

Advertisements

Black Friday and Blue Dragons!

Speck! 🙂

Soooo, how was your Thanksgiving? Mine was nonexistent because I don’t live in the U S and A. 😛 Despite the fact we don’t do Thanksgiving over here, we’ve done Black Friday for the last couple of years for some reason. Honestly, I don’t understand. Maybe it’s just because the shops realise they can make moar moneyz if they all discount stuff at the same time, then they end up fighting each other to give the best discounts, then customers start fighting each other to get the best discounts, then it goes on the news and I laugh at all the degenerates scrabbling for the last plasma TV. 😛 But hell, I’m not complaining, it was pretty awesome last year, actually; through pure luck I managed to snag an Intel Core i7-4790K CPU for £50 off the standard price. Oosh! 😀

This year… wasn’t so oosh. 😛 I’d been thinking about grabbing some new peripherals and a new GPU for a few months beforehand. I replaced my legendary Logitech G15 keyboard with a not-really-legendary-yet G910 when I found it on Amazon for about £40 off. Didn’t expect it to go much lower than that (and it didn’t 😛 ). Also before Black Friday, I had to replace my G700 mouse because the mouse buttons were starting to give up the ghost. I got a G700s because the G700 was pretty much perfect. Apart from the metal on the mouse wheel which rusted a bit. And that some of the buttons were squeaky. And that the power lead was quite rigid and generated a lot of friction when it was plugged in, so using it while it was charging sucked a little bit. 😛 The new one’s great, though; same as the G700 but it’s a bit prettier, the buttons feel better and there’s no rust yet. Power lead still ruins the mouse when it’s plugged in, though. I also got a new cloth mouse mat to replace my old busted metal one, as well as a USB hub and Micro USB leads after finding that Arx Control (the smartphone app which is supposed to be a replacement for the LCD displays you find in some Logitech keyboards) drains your phone’s battery like friggin’ crazy, and the G910 doesn’t have any built-in USB slots, so unless you have a Micro USB that reaches from the back of your PC to your keyboard so you can plug in your phone, your battery will run out. 😛

So, I’d bought all my peripherals and accessories, but I was still in the market for a GTX 970. Then, when Black Friday actually came along… POOP! It was awful. Couldn’t find jack all. One site actually had an offer where you could save 40p on a Raspberry Pi. Wooooow! And even after that AMAZING discount, it was still way more expensive than just buying it directly from the Raspberry Pi Foundation! 😛 I noticed some nice cuts on SSDs (but they’re quite cheap anyway these days), and some okay bundle deals, but there were basically no decent offers on GPUs at all. Two of my mates… er… one of my mates got an okay deal on a GTX 970. 😛 They paid about £250 all-in, but it wasn’t that much of a discount.

There WAS a moment where I found a post on Hot UK Deals with 70-odd upvotes advising that you could buy a GTX 970 off Amazon.fr and get it shipped over here for approximately £220. Acting completely idiotically, much like a Black Friday shopper, I quickly placed an order. Moments afterwards, my frontal lobe turned back on and went “wait wait wait, it’s an international purchase; what about import costs?” There’s no import duty from France for electronics like this, but of course; you have to pay 20% VAT, which brings the cost to around £264, which is MORE than it would’ve cost to buy it here! Not a single one of the nonces on that HUKD page had realised. Thank God some of my brayn cells still work. PROFESSIONAL PANDA PANCAAAAKE

It wasn’t a total bust, though. On Cyber Monday I went on Scan.co.uk, the site I’d totally forgotten about. Luckily, I found they were selling an EVGA GTX 970 for £240; the cheapest (real offer) I’d seen over the weekend. Oh, no, wait… apart from an MSI GTX 970 I saw on an Aria.co.uk newsletter for £220, but unsurprisingly, they were all gone within 30 minutes. 😛 Anyway, after some thought and research, I decided to blow my budget for the month wide open, and ordered two of ‘em. 😀 If I’d just bought one, I’d do what I did with my GTX 770 and plan to get a second one but end up not getting around to it. I didn’t spend extra on an SLI-compatible motherboard for nothing. 😛 It sounds like stupid overkill, but according to an SLI review of these cards, the diminishing returns for two-way SLI is actually quite low. It should boost most things that can’t do 60FPS on one card to 60FPS, and boost games that can do 60FPS to 120FPS or close to it (haven’t got a 120hz monitor for nothing, either, and yes, 120hz does make a difference! 😛 ).

I experienced a bit of fury this morning when I got an e-mail saying the products I’d ordered couldn’t be sent because they were “discontinued” (lol no), but after querying Scan with some moderate force thinking they were trying to back out of honouring the price they offered, they said to ignore that e-mail because it was a mistake. They’re just having some… pretty major delays. 😛 Don’t think I’ll get them until Friday, but when I do, I’ll letcha know how awesome they are at running Transport Tycoon. Haha. 😛

Anyhoo, that’s that bit done. What’s next… ah, yes. Heehee. Heeeeheeheeheee! 😀

I started work on a scene in DAZ Studio over a week ago, but ended up stopping a few steps before completion. There were several reasons for this. One of them was because of my mouse; the mouse buttons were so phwoacked that unless I applied a shit-ton of force to them, drag operations had an unreasonably high chance of being interrupted. I would be dragging the mouse to rotate the camera, then suddenly the mouse button would unclick and click during the drag, causing me to mess with a property or switch tabs or hit render or generally do something very annoying. It wasn’t just DAZ Studio; it was definitely a hardware issue because the same thing was happening everywhere. It was probably even more annoying in Explorer. 😛 Another reason was DAZ Studio itself. The crashes… God, the friggin’ crashes! It was just… fucking ridiculous! I tried everything to reduce the crash frequency; I even ended up messing with the processor affinity to restrict DAZ Studio so it could only use 6 of the 8 CPU cores. That helped a bit, but not enough. Restricting it to 4 cores wasn’t any better. It’d still crash the graphics driver every so often, and cause a Blue Screen of Death a bit more rarely. The third reason I stopped was because no matter what I did, I couldn’t get friggin’ specular highlights to show up on the dragon’s eyes. Well, I could, but they looked completely wrong. Like… all speckly and crap. I basically just wanted to punch DAZ Studio’s face in the face.

Since I’d gotten a new mouse, I went back to DAZ Studio last night in an attempt to finish it off. It was still crashing the graphics driver, but it didn’t feel as often as usual. I was patient with it and made sure to close the viewport before a render (if you don’t, and if it crashes the graphics driver, DAZ Studio also crashes and you lose your current render progress, huehuehue oh my god it’s so painfully dumb). But then, after a few crashes… it just… stopped crashing. Completely. Not a single hiccup or anything. Smooth like butter. Caress your lover. Enjoy the mome… yeah. 😛

There were a few new frustrations. As I dropped the shading rate for more detail, DS started taking a psychotic amount of time to do what appeared to be… nothing. After some annoyance and some probing, I found out that Subsurface Scattering (SSS) was enabled on SOME of the Dragon 3 material presets, but not all of them. I was previously using a preset that didn’t use SSS, and that night, I’d switched to a material preset that did while I was trying to work out why specular wasn’t working on the dragon’s eyes. I didn’t switch it back after I found the problem and just switched the diffuse textures instead because… well, because I didn’t know that some of the presets didn’t use SSS, cuz that just would be dumb and inconsistent, right? 😛 This is how I discovered that SSS is goddamn expensive, especially in final renders. 😛

I disabled SSS on everything, finished off the tweaks to the head morphs… then took a deep breath before tweaking the render settings and UberEnvironment to render at final, DJ Max quality. 😀 Then I pressed the render button and left it running overnight. Guess what? This morning, it was happily sat there, displaying a DJ Max quality render like a doge with a newspaper in its gob. It hadn’t blue screened or crashed or broken or anything! It was all like “here is your render (mong)master, may I please you with another?”

Unfortunately, it did have to please me with another; the lighting was too weak in the first render. While I’ve been at work today, I’ve been popping onto TeamViewer every so often, having a gander at the latest render, tweaking some settings and firing off another one. DS’s been super-cool about it all, and I don’t understand why, especially since I lightly overclocked my processor just the other day, technically making it more unstable and more prone to crashing! ARGH DAZ, WHY YOU SO ERRATIC?!?

But no no no, I’m not complaining. I like it not crashing. 😛

Anyway, yes, maybe I’m blathering a bit. That’s because I’m just a li’l bit hyped to show you this. 😀 When I got home, what I believed was going to be the final render was waiting for me. It was good, but there were a few things I wanted to change. After that, I did the actual final render. And here it is:

Dragon.Init() (1080p)
Available in: (1080p) (QHD) (WQXGA) (UHD)

Hahahahahahaaaaaa! Man, I’m ultra happy about this one! 🙂 It’s just… ah, screw it, I’m throwing modesty outta the window for a minute. This is AWESOME! The concept is fun, the scene arrangement and posing really worked, the lighting’s turned out really nice (it’s the first time I’ve used UberEnvironment 2’s Global Illumination), the textures look good, the depth of field (DoF) is perfect, and the only postwork I did was a slight “bloom” effect, as well as the title and signature. I reckon it’s my best render yet! 😀 But my opinion means jack; what do you think? Let me know! 🙂

As I mentioned, I changed a few things after the first final render, which you can have a look at here. The first change was a replacement texture for the awful, low-resolution one I was using for the desk… stone… stone desk thing. 😛 It looks waaaay better. The second adjustment was the addition of a can of Wyvern Energy (frost flavour). 😀 Just a little extra touch to make the image a bit more fun. And somewhat accurate. 😉 The third adjustment was the DoF; even though it was great in the original render, it blurred out the Wyvern Energy can a bit too much, so I had to tweak it. 🙂 Oh, and I increased the size of the PC tower, too. It was a li’l bit small. 😛

Right, let’s see… stats for those who care! 😛 Rendering at WQHD with UberEnvironment 2 on Bounce Light (GI) mode and with the XHi quality preset, with a general Shading Rate of 0.2, the total render time was… 2 hours 10 minutes 5.31 seconds. Took about 9 minutes longer than the version I made before the adjustments; I blame reflection. 😛 It was a pretty heavy job this time; respect goes out to the i7-4790K @ 4.3GHz. 😀 Oh, don’t worry (if you are), I’ll make sure to get 1080p and 4K renders done and add them to the post, too! They won’t be until tomorrow at least. Depending on if DAZ Studio keeps bluescreening the PC (yes, it’s started doing it again for basically no reason). 😉

Right… phew. I think that’s it for now. Crap, this post was technically supposed to be about Paper Mario: Sticker Star and Project Mirai DX. Ah well; I’ll talk about them next time. 😛 For now, though, I’m off. See yaz!

UPDATE!!
I don’t really understand what exactly it’s doing, but DAZ Studio has… well, it’s stopped bothering with non-fatal driver crashes and is more frequently causing the PC to bluescreen through fatal driver crashes. It crashes at random times, sometimes after about 30 seconds, sometimes after about an hour… but it always gives the same error: DRIVER_CORRUPTED_EXPOOL. I imagine it’s a graphics driver crash, but honestly, I have no idea. I’ve tried disabling integrated graphics but there was no difference, and I haven’t done the more extreme option of unplugging the primary GPU and running off integrated graphics yet. I’ll try that tonight, because whatever the reason is, it’s making this 4K render absolutely impossible.

I started it earlier today before heading to work. So far, so good. I’ll leave you with a snapshot of the current progress:

Capture.PNG

Pleasedontcrashpleasedontcrashpleasedontcrash

UPDATE 2!!
WHOOO YEAAAAH ALLLLRIIIIIGHT!!!

Seriously I shouldn’t be this excited or happy that DAZ Studio finally rendered a 4K image on this perfectly healthy, quite powerful PC. A renderer successfully rendering a scene is what should happen. Every time. Because otherwise the renderer fails at its only purpose. 😛

I’ve added links to the 4K (UHD) version and the 1080p version (YES IT DID THAT TOO, HOLY SHIT!!). While this strange unexplainable streak continues, I’m rendering a… erm… a 2560×1600 version, which is a stupid aspect ratio that MacBooks use. I’mma set it as my desktop background on the one I use at work. Maybe it’ll make it faster or nicer to use. 😛

UPDATE 3!!
Finished off that WQXGA render and added it to’t list. Yes that’s the resolution’s actual name. 😛 Any other resolution requests, just lemme know! 🙂

mongmaster.wordpress.com has been (un)suspended!

Whoa. WHOA. WHOOOHOHOHOHAAAAHHAOOA! My number of subscribers has doubled! TO TWO!!

Welcome, Mr./Mrs./Miss./Dr. New Subscriber! 😀

Yes, it was almost immediately after my blog came back online. Y’see, I was just passing by, doing a couple of tweaks to some articles, not going to write another one because I didn’t really have much to write about, when all of a sudden, I get some weird-ass errors when trying to update a post. Something about an API call that failed. About a minute later, just when I was about to say “stuff this, I’ll come back to it later”, I get a banner at the top of my dashboard, saying the blog has been suspended because of a violation of the Terms of Service.

Lel?

I thought maybe I had done something wrong at some point yeeeeears ago, back when this blog was actually on Windows Live. I thought something’d crept up from then and bit me in teh ash whole. But even so, an instant suspension and imminent deletion with no warning or reason whatsoever? I didn’t even get an e-mail, and nothing explained why this had happened. Come on.

Naturally, I contacted support. Turned out that I’d been hit by an anti-spam bot which flagged the site. Understandable! 😛 Can’t fault the support I got, really. Well, apart from that they didn’t actually fix the issue the first time I contacted them, but whatever, no biggie, they still got me back up and running within 24 hours. 🙂  I’m still gonna tag all my posts with that tag, though. 😛 IT’S TRADITION!

Anyway, yes, I’m back, with DOUBLE the subscriber POWAAAHH! Awwww yisss, I’m SMASHING my way onto the Internetz celebrity scene BIG time. Haaaah. 😛  As a celebratory thingiemabobbyjig, I’ll go ahead and post something I was gonna post anyway! WHOOOO! CELEBRATIONZ! 😀

I finally got my ass in gear and got around to rendering a final version of The Third Breed; the render I made in my last (real) post. 🙂 Man, it was a pain to render out again. I updated to DAZ Studio 4.7, which was a slight mistake, and I’m currently rocking the Windows 10 Technical Preview, which is a mistake and a good thing in almost equal measures. Let’s just say it took at least 6 attempts to render it out. 😛

Why? Well, during a render, the CPU completely maxes out, and the Pwnage-O-Matic V6 doesn’t seem to be happy about this. 😛 I got about 3 BSoDs, the computer completely locked up once, and the graphics driver kept crashing, too. I really doubt it’s a hardware issue since the processor is practically brand new, never exceeds 60C at full load, and is currently running at stock speed. It’s probably some kinda Windows problem. Although… I did close a bunch of background programs before I began the render attempt that finished successfully. Or maybe it was just a fluke. We’ll see when we render Year of the Goat. 😀

As an extra-special treat, I rendered it in both 1080p and 4K. 😀 To render the scene in 4K, it took… 2 hours 10 minutes and 21.44 seconds. Says the log file. 🙂 Anyway, yez, I’ll stop yammering and show you le beautiful dragon! BOOYAH:

The Third Breed - DracoAurarius
Available in: (1080p) (4K)

It’s not hyper-different from the draft, but it’s better. His head’s angled down a little more, and his claw is a bit closer to his body. I also tweaked the position of his left wing, adjusted the lighting slightly, and rendered at max quality. DJ MAX quality. 😀 Also saved the final JPEGs at a higher than normal quality because I noticed some really ugly artefacts on the draft version.

I hope you liek! 🙂 If you want him on your desktop but I haven’t rendered at your native resolution, I’d be happy to churn another render out for your res and add it to the list. Just lemme know! 😀  Within reason, of course. I ain’t rendering it out at some crazy-ass overkill res like 16K or something. I like my PC to be usable! 😛

Anyway, I think that’s all for now. I’ll make a separate post about my new PC build later on. And Windows 10, and DAZ Studio 4.7, although there’s not a great deal to say about it. And of course, the 4th Chinese New Year render is almost here! I gotta render a GOAT and make it look EPIC!

Maaaaaan this year’s image is gonna suck! 😛

The Third Breed

Hoooo boy! It’s been a while since I’ve touched DAZ Studio. Conveniently about the same amount of time since I last touched this blog, actually. My last post was a render for Chinese New Year made in DAZ Studio, so… yeah. Heh. 😛

In the time I’ve been gone, I’ve been hard at work doing work so I can pay for a place to live and donating the rest to the government. 😛 My finances are going up now, though, which is nice. It’d’ve been highly depressing if it was some generic office job or something, but I’m doing what I’ve trained to do for years – programming games. 😀 Sure, it’s not a huge company, and I’m only doing mobile games, but I much prefer working in a smaller team, and the challenges aren’t much different from programming anything else. So it’s great! 🙂 I kinda wish the game I was developing and the company we were developing it for didn’t completely suck, though. 😛

Anyhoo, yes, back to the original topic of my post, DAZ Studio. It’s been nearly 7 months since I last opened it. I’ve never really thought about it at all since then. I would’ve probably gotten close to February next year, remembered that I needed to do the next image in my Chinese Zodiac series and opened it then. 😛 But yeah, there hasn’t really been any particular urge to open it for a while. Besides, my focus is developing ULSG V14 in whatever spare time I can pull together.

However, a couple of days ago, I stumbled across a render of a dragon in a pretty basic pose. It looked like it’d been done in Poser or DAZ Studio. The quality was pretty dire, so I was halfway to the back button until I did a double take. I realised that I didn’t really recognise this dragon, and I have nigh on every dragon available for DAZ Studio. At first glance, I thought it was the SubDragon, but his face looked just a little bit different. Then it was like a chain reaction of HOLY SHITness. I noticed that he had no horns. He had horns on his nose, but they were flat and looked like they hadn’t been morphed. His scales looked different, too. Then I noticed his claws and feet. He had four fingers and a thumb on each hand, and four toes and a dewclaw on each foot. The SubDragon has one less. That was probably the biggest giveaway, and made me say “WHAT THE HELL IS THIS DRAGON?!”

Not long after this, I found out it was the latest in the series of DAZ’s dragon models – the DAZ Dragon 3! Yes, yes, it’s not the most imaginative of names. And it’s actually very inaccurate, since there are now FOUR main entries in the DAZ Dragons series: the Dragon, the MilDragon, the SubDragon and the Dragon 3. 😛 But meh, whatever. After finding this out, my urge to render increased massively, and naturally, I jumped on it immediately. 😛

The one thing that bugged me, though? Well, the DAZ Dragon 3 is actually a “Genesis” figure, DAZ’s most recent “technology”. I don’t know a great deal about it, just that it’s a model that can be morphed into something hugely different from the base figure. Oh, and it’s ONLY supported in DAZ Studio 4. Apparently.

Nowww… it’s somewhere in this blog… ah, here. Back in this post I tried out DAZ Studio 4, when it first came out. It was wank. The entire UI was redesigned, so your layout from DAZ Studio 3 was chucked away, and you were given a choice of preset layouts instead. I nicknamed them Noob Mode, Annoying Mode, “Expert” Mode and Shouldn’t Even Be Using This Program Mode. The best mode was Noob Mode, but that’s like awarding it first place in a leper competition. Annoying Mode had about 6000 different sections that weren’t easily configurable. “Expert” Mode was for people who thought they were experts but were actually just stupid. It had ONE section containing nigh-on EVERY POSSIBLE TOOL (including pointless ones), ONE viewport to work in, and a NON-COMPACT UI, making it pretty much bat-shit insane. Shouldn’t Even Be Using This Program Mode is still in “beta” even after five years, and is for frightened people with no desire to pose things themselves who would probably uninstall the program within 30 minutes.

As far as I recall, the UI design also brought along some gay slidey animations whenever you selected a docked tab. They weren’t smooth, or fast, or interesting. They just slowed me down and irritated me. The tab names were also written VERTICALLY, so you had to tilt your head to read them easily. This, hilariously, took up MORE space than the old UI. Basically, it was an absolutely terrible upgrade that had no advantages whatsoever. It used more resources, added more useless bloat, and the render engine was just as fast as DS3.

But if I wanted to use the DAZ Dragon 3, I had no choice but to use DS4. Gurrrrgh. Well, it’s been 5 years since then. I thought that they’d’ve made it better within that time, right?

Well… yes, actually.

But it took HOURS. 😛

The default layouts are still there and haven’t changed. However, joy of friggin’ joys, you can choose an alternate skin. There’s a choice of three – Main Street, Highway and Darkside. Anyone who uses Main Street is a spaz, unless you have sight issues or something. Seriously, the tabs are idiotically large and spacing between icons is larger. Do you WANT space to work? Then you must at LEAST choose Highway. This basically removes pointless padding, and isn’t too bad. But real men choose Darkside, because it looks like DS3 (which looked fairly cool) and uses about the same amount of space that Highway does. 😛

The difficult part is modifying one of the preset layouts. It literally took me two hours to modify Annoying Mode into a layout that worked for me.

The DJ Max

Four workflow modes: one for loading, one for constructing the scene, one for adding lights and cameras, and one for rendering. All modes except for Load have Parameters and Surfaces tabs, so you can tweak objects or materials without needing to switch modes. There’re no animation things because I think proper animation in DAZ Studio is absolutely impossible. Puppeteer is gone OF COURSE. Almost all camera cubes and pose tools are fucked off because they’re annoying, especially the camera cubes. And tabs are along the TOP rather than up the side, thank GOD. 😛

I call it “The DJ Max” because I have brain cells that are connected incorrectly. 😛 I’ve dumped the preset on Dropbox HERE, if anyone would like to use it. 🙂

UPDATE: I dumped Dropbox because I got a nice e-mail from them saying they were about to drop 23GB of my 31GB because it was part of a promotional offer. I think they were hoping that I subscribed to Dropbox Pro but then I realised I actually have a 30GB limit on OneDrive. And if you subscribe to Office 365, you get 1TB of space. And Microsoft Office, of course. And 60 Skype minutes a month. All for less than Dropbox Pro. GG Dropbox! But enough of that. Here’s a new link to the preset. Just let me know if it breaks again. 🙂

Anyway, yes. DAZ Studio 4.6 is actually pretty good now. It works about as well as DAZ Studio 3, and that’s all I can really ask for. Now, back to the Dragon 3.

…actually, is there another name I could use? D3? Oh shit no that reminded me of Diablo 3 and nearly made me vomit. I’ll just use Dragon 3 for now. 😛

Anyway, my experience with Dragon 3. Simply put? He is flat out awesome. I don’t really know what to criticise. He has the same kind of build as the SubDragon, so he is ultra-flexible and can probably do anything. But there are so many improvements. There are at least 100 morphs and a full set of expressions. He even has visemes, and might actually work with lip-sync if… er… if lip-sync still existed, seriously they got rid of that?! Or I can’t find it. Eh, whatever. He’s missing B, C, T, R and probably loads of other visemes anyway. 😛

The morphs that blew my mind were the horns. He has five sets of horns you can morph, and four of them are pretty standard. However, his main horns? Hhhhhohhh. There are 13 types. And they are all combinable.

Horns 1(R) Horns 2(R) Horns 3(R) Horns 4(R)

Of course, most combinations just end up as a total mess, but it’s awesome you can do that. 😀

He comes with some poses, of course. They’re good to let you take him out for a test render more quickly, but I don’t really use them for anything other than that. 😛 They do show off his flexibility, though. And just like the SubDragon, he’s got such a great range of personality.

Relaxed

And goddamnit. It’s gotta be said – he’s a gorgeous-looking dragon. Every part of him is beautiful. 😀 The model is so detailed, and the textures are ultra-high resolution, too. And the morphs don’t seem to affect the texture quality like they do on the SubDragon.

As I said, it’s been a while since I touched DAZ Studio, and even longer since using DS4, so I’m a little rusty. I’ve spent a few hours getting back to grips with everything, including my old friend, UberEnvironment2. 😀 Here’s what I cooked up:

The Third Breed (Draft)

I love him – he’s just awesome. 😀 This render needs a bit more work, though – the quality needs to cranked up a bit more. I’ll probably do a proper render with him at some point. Maybe with the SubDragon? We’ll see. 🙂